HANTECH 18000 BTU UV-C Split Air Conditioner WLAN R32 Air Conditioner 5,1 kW Air Condition Mod. HPRO
HANTECH Split Air Conditioner 18000 BTU
Pre-filled with R32 for approx. ∼5m pipe length. 230V household voltage near the outdoor unit is required for operation. The indoor unit is supplied with power from the outdoor unit via an electric cable. Thanks to the latest inverter technology with precise speed adjustment at low power consumption and permanent room temperature monitoring, a pleasant, even climate is guaranteed. Evacuation of the pipes by an air-conditioning technician is mandatory for long-term trouble-free operation.
- Indoor unit 920×306×195mm
Weight 11 kg
- Outdoor unit 853×602×349mm
Weight 35 kg
- Pressure line
- Suction line
up to 51m²
|Design load cooling mode||kW||5,1|
|Design load heating mode||kW||3,8|
|Energy efficiency class cooling||A++|
|Energy efficiency class heating||A+|
|Cooling coefficient of performance (SEER)||6,1|
|Coefficient of performance cooling mode (SCOP)||4,0|
|Power consumption 1*) Cooling||kWh/year||293|
|Electricity consumption 1*) heating||kWh/year||1330|
|Heating period (average)||°C||to -10|
|Sound power level max.||db(A) re1 pW||65|
|Refrigerant (GWP) 2*)||R32 (675)|
|Connections / thread||1/4" 3/8"|
|Sound pressure inside||db(A)||from 22|
|Sound pressure outside||db(A)||54|
|Power consumption cooling||Watt||330-2350|
|Power consumption heating||Watt||330-2350|
|Dimensions product inside||WxHxD||920×306×195 mm|
|Dimensions product outside||WxHxD||853×602×349 mm|
|Weight product inside||kg||11|
|Weight of product outside||kg||35|
1*) Energy consumption per year (kWh/year). Based on standard test results. Actual consumption depends on usage and location of the unit. 2*) Refrigerant leakage contributes to climate change. Refrigerants with lower global warming potential (GWP) contribute less to global warming in case of leakage than those with higher global warming potential (GWP). This unit contains refrigerant with a GWP equal to 675. Thus, a leakage of 1 kg of this refrigerant would have 675 times greater impact on global warming than 1 kg of CO2, based on one hundred years. Do not carry out any work on the refrigerant circuit or disassemble the unit - always consult qualified personnel.
The HANTECH™ nano-titanium oxide gold coating on the partitioned evaporator coating is self-cleaning, inhibits bacterial growth and provides improved corrosion resistance, keeping the energy yield virtually identical even after 8 years. Organic pollutants are broken down and odours neutralised.
Comfortably operate the air conditioner with all available functions and settings while on the move. For example, you can pre-cool the rooms a few minutes before arrival in order to arrive in a pleasantly tempered room. The control, in addition to the infrared remote control, is also possible via the home W-Lan network without using the Internet.
Highest performance and air circulation shorten the time to the desired temperature
Minimal fan noise ensures whisper-quiet operation and idyllic nights
How it works
Freeze the heat exchanger to retain dirt particles.
Defrosting is carried out to loosen and rinse off the dirt.
Preparation and drying of the heat exchanger
Harmful microorganisms are killed at 56°C for 30 min.
Temperature is measured at the remote control
Switch timer 24h on and off
Ionisation of the room air
Prevents cooling during the night
Drying prevents bacteria formation
Frost protection - rooms always remain above 8°C
LED display can be switched off if required
More space for pipes and condensate pumps
Easy detachment from the mounting plate
Convenient access for electrical connection
More space for connection and leak test
Bracket with spacer
Easily check connections for leaks after installation Up to 120mm clearance to work with
Leakage test in installed condition
Thanks to the mounting plate with spacer, check for leaks comfortably even after installation
Easy to replace electronics - quick access in the event of a malfunction or defect of the main board in the indoor unit
Why change to R32 ?
According to EU regulation CE 517 2014, R410A is being phased out and replaced by non-fluorinated gases (F-gases) such as R32 for environmental reasons. Smaller quantities are required, can be recycled and reused more easily.
Positive effect is no impact on ozone layer and reduced global warming phenomenon. There will be a transition period for R410A from 2017 - from 2025 import will be banned for equipment with charge <3kg. As a simple refrigerant, not a compound, R32 can be easily recycled and reused. Thus it is environmentally friendly
Advantages over R410A
- ∼70% less nefarious potential
- 0% ozone impact
- Less impact on global warming
Nowadays, protecting the environment is one of the most important challenges of society. Both end users and manufacturers are doing their best to protect the environment as they can. As one of the pioneers of air conditioning manufacturing, HANTECH is committed to R32.
Effort for air conditioning engineers
As R32 is no extra cost and is as easy to install as R410A, there will be no extra costs. On the contrary, R32 is cheaper because less of the medium is needed for the same cooling capacity.
Scope of delivery
- Outdoor unit HANTECH 18000 HPRO MODEL (R32 prefilled for up to ∼5m)
- Indoor unit HANTECH 18000 HPRO MODEL
- 4x vibration dampers / rubber pads for outdoor unit
- El. connection cable 4m
- Remote control
- Condensation water hose
- 2x union nut for 1/4 pipe
- 2x union nut for 3/8 pipe
- Please note that copper pipes in 1/4" (6mm) and 3/8" (10mm) are required for the installation.
|Net weight||45000 g|
|Customs tariff number||84151090|